Dark colors inkjet printable PU transfer film for desk top/office inkjet printer

Dark colors (opaque) inkjet printable PU transfer film for desk top/office inkjet printer

Dark inkjet transfer PU film is printed by normal waterbased dye or pigment ink, then transfer it on dark colors fabric,textile,garment...

Advantage

1.  Customize fabric with favorite photos and color graphics.
2.  Designed for vivid results on dark or light-colored cotton or cotton/polyester blend fabrics
3.  Ideal for personalizing T-shirts, canvas bags, aprons, gift bags, mouse pads, photographs on quilts etc.
4.  The back paper can be peel off easily in 15 seconds after transferring.
5.  Iron on with a regular household iron & heat press machines. 
6.  Good washable and keep coloration

 Packing

 Application
    Dark color (opaque) Inkjet transfer paper is ideal for customizing dark or light colored T-shirts, aprons, gift bags, mouse pads, photographs on quilts and more

Printer Recommendations
     It can be printed by all kinds of inkjet printers such as :

Epson Stylus Photo 1390, R270, R230, PRO 4400,;

Canon PIXMA ip4300, 5300, 4200, i9950, ix5000, Pro9500; 

HP Deskjet 1280, HP Photosmart D7168, HP Officejet Pro K550, etc.

Printing setting
 Quality Option: photo(P), Paper Options: Plain papers. The printing inks are ordinary waterbased dye,pigment,or sublimation ink.

Iron-On transferring

1.  Prepare a stable, heat-resistant surface suitable for ironing on.
2.  Preheat the iron to the highest setting, recommended ironing temperature 200°C.
3.  Briefly iron the fabric to ensure that it is completely smooth.

4. Put transfer paper into inkjet printer for printing with coated side up,after drying for several minutes.

5. The printed images will be cutted off with a cutting tool, and the white side of the image will be kept about 0.5cm to prevent ink from seeping and staining the cloths.

6. Peel the images line off from the backing paper gently by hand,place the image line face upwords on the target fabric,then cover a greaseproof paper on the surface of the image,finally cover a layer of cotton fabric onto the greaseproof paper. Now you can iron the cotton fabric througly from left to right and up to down.

7. When moving the iron,less pressure should be given,don't forget the corners and edges.

8. Continue ironing until you have completely traced th sides of the image. This entire process should take about 60-70 seconds for an 8''x10'' image surface.

9.After ironing,move away cotton fabric,then cooling for about several minuts,peel the grease proof paper starting at the corner.

10. Please keep the grease proof paper if there are no residual inks. It is possible to use the same the grease proof paper,five times or mor.maybe you can use it next time.

Heat press transferring
1. Setting heat press machine 165°C for 25 seconds using moderate pressure. 
2. Briefly heat the fabric 5 seconds to ensure that it is completely smooth.

3. Leavee the printed image to dry for approx 5 minutes,cut out the motif without leaving a margin around the edges. Peel the image line off from the backing paper gently by hand.

4. Place the image line facing upwords onto the target fabric

5. Place the grease proof paper onto it.

6. Place the cotton fabric onto it

7. After transferring for about 25 seconds,move away cotton fabric then cooling about several minutes,peel the grease proof paper starting at the corner.

Washing Instructions:
      Wash inside out in COLD WATER. DO NOT USE BLEACH. Place into the dryer or do hang to dry immediately. Please do not stretch the image transferred or the T-shirt as this may cause cracking to occur, If cracking or wrinkling does occur, please place a sheet of greasy proof paper over the transfer and heat press or iron for a few seconds making sure to press firmly over the entire transfer again. Please remember to not iron directly on the image surface.

Finishing Recommendations
    Material Handling & Storage: conditions of 35-65% Relative Humidity and at a temperature of 10-30°C.
    Storage of open packages: When an open packages of media is not being used remove the roll or sheets from the printer cover the roll or sheets with a plastic bag to protect it from contaminants, if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll do not lay sharp or heavy objects on unprotected rolls and do not stack them.